Configuration
Znote 3215W 15,4" WXGA
Keyboard Znote 2x25/3x15/3xx4 - D
Intel C2 DUO T5250 1,50GHz 667MHZ
2048MB (2x1024) PC5300 Original Z
Intel® GMA X3100
Intel Pro/Wireless 4965AGN
80GB SATA, 2,5" 5400RPM - HDD
SAMSUNG DVD-RW DL 6xx4W/6xx5WD/2x
6 Cell Batteri til Znote 2xx5W/2x
No operating system ordered (Ubuntu 8.04 installed)
dmesg output- - -
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7bc0
[ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521936
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521936
[ 0.000000] On node 0 totalpages: 521936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290275 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7B40 checksum 0
[ 0.000000] ACPI: RSDP 000F7B40, 0024 (r2 Compal)
[ 0.000000] ACPI: XSDT 7F6D872A, 008C (r1 Compal CRESTLNE 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7F6DFBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7F6D9B51, 600D (r2 Compal CRESTLNE 6040000 INTL 20061109)
[ 0.000000] ACPI: FACS 7F6E2FC0, 0040
[ 0.000000] ACPI: APIC 7F6DFCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7F6DFD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7F6DFD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7F6DFDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TMOR 7F6DFDD4, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: SLIC 7F6DFDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
[ 0.000000] ACPI: APIC 7F6DFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7F6DFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7F6D988C, 02C5 (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D8D42, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D8C9C, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D87B6, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: DMI detected: Compal
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859
[ 0.000000] Kernel command line: root=UUID=9d8aeef0-f694-4ed2-9b08-7dfbce32e3e1 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1496.267 MHz processor.
[ 42.529049] Console: colour VGA+ 80x25
[ 42.529052] console [tty0] enabled
[ 42.529353] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 42.529679] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 42.635070] Memory: 2057540k/2087744k available (2157k kernel code, 28992k reserved, 998k data, 364k init, 1170240k highmem)
[ 42.635078] virtual kernel memory layout:
[ 42.635079] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 42.635081] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 42.635082] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 42.635083] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 42.635084] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 42.635086] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 42.635087] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 42.635090] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 42.635133] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 42.635298] hpet clockevent registered
[ 42.715261] Calibrating delay using timer specific routine.. 3003.14 BogoMIPS (lpj=6006296)
[ 42.715288] Security Framework initialized
[ 42.715294] SELinux: Disabled at boot.
[ 42.715309] AppArmor: AppArmor initialized
[ 42.715313] Failure registering capabilities with primary security module.
[ 42.715321] Mount-cache hash table entries: 512
[ 42.715452] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 42.715461] monitor/mwait feature present.
[ 42.715463] using mwait in idle threads.
[ 42.715467] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 42.715470] CPU: L2 cache: 2048K
[ 42.715473] CPU: Physical Processor ID: 0
[ 42.715474] CPU: Processor Core ID: 0
[ 42.715477] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 42.715487] Compat vDSO mapped to ffffe000.
[ 42.715500] Checking 'hlt' instruction... OK.
[ 42.731666] SMP alternatives: switching to UP code
[ 42.733459] Early unpacking initramfs... done
[ 43.132982] ACPI: Core revision 20070126
[ 43.133030] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 43.200221] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d
[ 43.200239] SMP alternatives: switching to SMP code
[ 43.200986] Booting processor 1/1 eip 3000
[ 43.211289] Initializing CPU#1
[ 43.290933] Calibrating delay using timer specific routine.. 2992.48 BogoMIPS (lpj=5984961)
[ 43.290940] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 43.290946] monitor/mwait feature present.
[ 43.290949] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 43.290951] CPU: L2 cache: 2048K
[ 43.290953] CPU: Physical Processor ID: 0
[ 43.290955] CPU: Processor Core ID: 1
[ 43.290956] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 43.291519] CPU1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d
[ 43.291543] Total of 2 processors activated (5995.62 BogoMIPS).
[ 43.291735] ENABLING IO-APIC IRQs
[ 43.291932] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 43.438964] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 43.458969] Brought up 2 CPUs
[ 43.458994] CPU0 attaching sched-domain:
[ 43.458997] domain 0: span 03
[ 43.458999] groups: 01 02
[ 43.459002] CPU1 attaching sched-domain:
[ 43.459004] domain 0: span 03
[ 43.459006] groups: 02 01
[ 43.459232] net_namespace: 64 bytes
[ 43.459241] Booting paravirtualized kernel on bare hardware
[ 43.459774] Time: 12:04:08 Date: 05/10/08
[ 43.459803] NET: Registered protocol family 16
[ 43.460004] EISA bus registered
[ 43.460009] ACPI: bus type pci registered
[ 43.460443] PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
[ 43.460446] PCI: Using configuration type 1
[ 43.460447] Setting up standard PCI resources
[ 43.463071] ACPI: EC: Look up EC in DSDT
[ 43.465476] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 43.465479] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 43.466023] ACPI: Interpreter enabled
[ 43.466027] ACPI: (supports S0 S3 S4 S5)
[ 43.466044] ACPI: Using IOAPIC for interrupt routing
[ 43.507470] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 43.507473] ACPI: EC: driver started in poll mode
[ 43.507514] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 43.508730] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 43.508735] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 43.510524] PCI: Transparent bridge - 0000:00:1e.0
[ 43.510594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 43.511024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 43.511171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 43.511315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 43.511458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 43.511601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 43.511744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 43.511904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 43.517681] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 43.517797] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 43.517910] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 43.518022] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 43.518134] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 43.518245] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 43.518356] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 43.518467] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 43.518628] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 43.518660] pnp: PnP ACPI init
[ 43.518668] ACPI: bus type pnp registered
[ 43.539026] pnp: PnP ACPI: found 10 devices
[ 43.539029] ACPI: ACPI bus type pnp unregistered
[ 43.539032] PnPBIOS: Disabled by ACPI PNP
[ 43.539255] PCI: Using ACPI for IRQ routing
[ 43.539258] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 43.702826] NET: Registered protocol family 8
[ 43.702829] NET: Registered protocol family 20
[ 43.702863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 43.702868] hpet0: 3 64-bit timers, 14318180 Hz
[ 43.703903] AppArmor: AppArmor Filesystem Enabled
[ 43.706701] Time: tsc clocksource has been installed.
[ 43.706710] Switched to high resolution mode on CPU 0
[ 43.706820] Switched to high resolution mode on CPU 1
[ 43.715688] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 43.715692] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 43.715695] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 43.715698] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 43.715701] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 43.715705] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 43.715708] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 43.715711] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 43.715720] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 43.715727] system 00:06: ioport range 0x680-0x69f has been reserved
[ 43.715730] system 00:06: ioport range 0x800-0x80f has been reserved
[ 43.715733] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 43.715736] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 43.715738] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 43.715741] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 43.715744] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 43.746183] PCI: Bridge: 0000:00:1c.0
[ 43.746187] IO window: 2000-2fff
[ 43.746194] MEM window: c0000000-c3ffffff
[ 43.746199] PREFETCH window: cc000000-cdffffff
[ 43.746206] PCI: Bridge: 0000:00:1c.1
[ 43.746210] IO window: 3000-3fff
[ 43.746216] MEM window: f0000000-f3ffffff
[ 43.746221] PREFETCH window: fa000000-fbffffff
[ 43.746228] PCI: Bridge: 0000:00:1c.2
[ 43.746231] IO window: 4000-4fff
[ 43.746237] MEM window: f4000000-f7ffffff
[ 43.746242] PREFETCH window: fc000000-fdffffff
[ 43.746249] PCI: Bridge: 0000:00:1c.3
[ 43.746252] IO window: 5000-5fff
[ 43.746259] MEM window: b8000000-bbffffff
[ 43.746264] PREFETCH window: c8000000-c9ffffff
[ 43.746271] PCI: Bridge: 0000:00:1c.4
[ 43.746272] IO window: disabled.
[ 43.746278] MEM window: disabled.
[ 43.746283] PREFETCH window: disabled.
[ 43.746290] PCI: Bridge: 0000:00:1c.5
[ 43.746291] IO window: disabled.
[ 43.746297] MEM window: f8200000-f82fffff
[ 43.746302] PREFETCH window: disabled.
[ 43.746309] PCI: Bridge: 0000:00:1e.0
[ 43.746311] IO window: disabled.
[ 43.746317] MEM window: f8300000-f83fffff
[ 43.746322] PREFETCH window: disabled.
[ 43.746357] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 43.746364] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 43.746392] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 43.746398] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 43.746426] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 43.746432] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 43.746459] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 43.746466] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 43.746492] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
[ 43.746498] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 43.746525] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 17
[ 43.746531] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 43.746547] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 43.746559] NET: Registered protocol family 2
[ 43.783677] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 43.783916] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 43.784377] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 43.784602] TCP: Hash tables configured (established 131072 bind 65536)
[ 43.784605] TCP reno registered
[ 43.795746] checking if image is initramfs...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 44.174066] it is
[ 44.583454] Freeing initrd memory: 7705k freed
[ 44.583613] Simple Boot Flag at 0x38 set to 0x1
[ 44.584264] audit: initializing netlink socket (disabled)
[ 44.584278] audit(1210421048.636:1): initialized
[ 44.584492] highmem bounce pool size: 64 pages
[ 44.586600] VFS: Disk quotas dquot_6.5.1
[ 44.586679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 44.586822] io scheduler noop registered
[ 44.586824] io scheduler anticipatory registered
[ 44.586826] io scheduler deadline registered
[ 44.586838] io scheduler cfq registered (default)
[ 44.586849] Boot video device is 0000:00:02.0
[ 44.587105] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 44.587171] assign_interrupt_mode Found MSI capability
[ 44.587227] Allocate Port Service[0000:00:1c.0:pcie00]
[ 44.587263] Allocate Port Service[0000:00:1c.0:pcie02]
[ 44.587375] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 44.587440] assign_interrupt_mode Found MSI capability
[ 44.587493] Allocate Port Service[0000:00:1c.1:pcie00]
[ 44.587527] Allocate Port Service[0000:00:1c.1:pcie02]
[ 44.587642] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 44.587707] assign_interrupt_mode Found MSI capability
[ 44.587760] Allocate Port Service[0000:00:1c.2:pcie00]
[ 44.587794] Allocate Port Service[0000:00:1c.2:pcie02]
[ 44.587908] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 44.587974] assign_interrupt_mode Found MSI capability
[ 44.588026] Allocate Port Service[0000:00:1c.3:pcie00]
[ 44.588059] Allocate Port Service[0000:00:1c.3:pcie02]
[ 44.588168] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 44.588234] assign_interrupt_mode Found MSI capability
[ 44.588286] Allocate Port Service[0000:00:1c.4:pcie00]
[ 44.588319] Allocate Port Service[0000:00:1c.4:pcie02]
[ 44.588430] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 44.588495] assign_interrupt_mode Found MSI capability
[ 44.588547] Allocate Port Service[0000:00:1c.5:pcie00]
[ 44.588581] Allocate Port Service[0000:00:1c.5:pcie02]
[ 44.588863] isapnp: Scanning for PnP cards...
[ 44.944074] isapnp: No Plug & Play device found
[ 44.970768] Real Time Clock Driver v1.12ac
[ 44.971039] hpet_resources: 0xfed00000 is busy
[ 44.971068] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 44.972736] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 44.972808] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 44.972911] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 45.016043] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 45.016048] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 45.038959] mice: PS/2 mouse device common for all mice
[ 45.039078] EISA: Probing bus 0 at eisa.0
[ 45.039085] Cannot allocate resource for EISA slot 1
[ 45.039088] Cannot allocate resource for EISA slot 2
[ 45.039090] Cannot allocate resource for EISA slot 3
[ 45.039092] Cannot allocate resource for EISA slot 4
[ 45.039094] Cannot allocate resource for EISA slot 5
[ 45.039110] EISA: Detected 0 cards.
[ 45.039114] cpuidle: using governor ladder
[ 45.039115] cpuidle: using governor menu
[ 45.039203] NET: Registered protocol family 1
[ 45.039230] Using IPI No-Shortcut mode
[ 45.039260] registered taskstats version 1
[ 45.039388] Magic number: 8:528:76
[ 45.039455] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 45.039457] EDD information not available.
[ 45.039657] Freeing unused kernel memory: 364k freed
[ 45.064128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 46.282819] fuse init (API version 7.9)
[ 46.304724] ACPI: SSDT 7F6D9610, 01B4 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 46.304981] ACPI: SSDT 7F6D8FA1, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 46.307117] Monitor-Mwait will be used to enter C-1 state
[ 46.307121] Monitor-Mwait will be used to enter C-2 state
[ 46.307124] Monitor-Mwait will be used to enter C-3 state
[ 46.307260] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 46.307265] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 46.307533] ACPI: SSDT 7F6D97C4, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 46.307771] ACPI: SSDT 7F6D958B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 46.308851] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 46.308857] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 46.657456] usbcore: registered new interface driver usbfs
[ 46.657480] usbcore: registered new interface driver hub
[ 46.657508] usbcore: registered new device driver usb
[ 46.658833] USB Universal Host Controller Interface driver v3.0
[ 46.658879] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 46.658891] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 46.658896] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 46.659112] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 46.659147] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820
[ 46.659278] usb usb1: configuration #1 chosen from 1 choice
[ 46.659303] hub 1-0:1.0: USB hub found
[ 46.659308] hub 1-0:1.0: 2 ports detected
[ 46.761986] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 46.762001] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 46.762006] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 46.762032] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 46.762070] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[ 46.762199] usb usb2: configuration #1 chosen from 1 choice
[ 46.762227] hub 2-0:1.0: USB hub found
[ 46.762232] hub 2-0:1.0: 2 ports detected
[ 46.804702] SCSI subsystem initialized
[ 46.813723] libata version 3.00 loaded.
[ 46.865969] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 46.865988] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 46.865992] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 46.866022] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 46.869949] ehci_hcd 0000:00:1a.7: debug port 1
[ 46.869957] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 46.869969] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[ 46.884795] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 46.884916] usb usb3: configuration #1 chosen from 1 choice
[ 46.884942] hub 3-0:1.0: USB hub found
[ 46.884949] hub 3-0:1.0: 4 ports detected
[ 46.988874] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 46.988891] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 46.988895] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 46.988921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 46.992833] ehci_hcd 0000:00:1d.7: debug port 1
[ 46.992840] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 46.992850] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8604c00
[ 47.008741] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 47.008855] usb usb4: configuration #1 chosen from 1 choice
[ 47.008881] hub 4-0:1.0: USB hub found
[ 47.008887] hub 4-0:1.0: 6 ports detected
[ 47.112928] ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 47.165633] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 47.169680] ata_piix 0000:00:1f.1: version 2.12
[ 47.169702] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 47.169748] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 47.169966] scsi0 : ata_piix
[ 47.170044] scsi1 : ata_piix
[ 47.170663] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 47.170666] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 47.444485] Clocksource tsc unstable (delta = -2451330871 ns)
[ 47.448830] Time: hpet clocksource has been installed.
[ 47.451079] ata1.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33
[ 47.465578] ata1.00: configured for UDMA/33
[ 47.490375] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB00 PQ: 0 ANSI: 5
[ 47.490777] tg3.c:v3.86 (November 9, 2007)
[ 47.490858] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 47.490876] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 47.534071] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:54:a0:6b
[ 47.534079] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 47.534082] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 47.534128] ahci 0000:00:1f.2: version 3.0
[ 47.534156] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 47.553352] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f79bc400ee4]
[ 47.601676] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 47.601683] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 47.601692] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 47.601975] scsi2 : ahci
[ 47.602219] scsi3 : ahci
[ 47.602407] scsi4 : ahci
[ 47.602521] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 217
[ 47.602525] ata4: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 217
[ 47.602529] ata5: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 217
[ 47.671161] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 47.672137] ata3.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7KP, max UDMA/100
[ 47.672142] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 47.673350] ata3.00: configured for UDMA/100
[ 47.695275] ata4: SATA link down (SStatus 0 SControl 300)
[ 47.716558] ata5: SATA link down (SStatus 0 SControl 300)
[ 47.716802] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
[ 47.717197] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 47.717209] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 47.717214] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 47.717245] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 47.717274] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860
[ 47.717407] usb usb5: configuration #1 chosen from 1 choice
[ 47.717433] hub 5-0:1.0: USB hub found
[ 47.717438] hub 5-0:1.0: 2 ports detected
[ 47.725495] Driver 'sd' needs updating - please use bus_type methods
[ 47.728681] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 47.728701] sd 2:0:0:0: [sda] Write Protect is off
[ 47.728705] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 47.728733] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.728800] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 47.728816] sd 2:0:0:0: [sda] Write Protect is off
[ 47.728819] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 47.728851] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.728854] sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 47.812680] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 47.812688] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 47.812724] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 47.812767] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 47.812890] usb usb6: configuration #1 chosen from 1 choice
[ 47.812916] hub 6-0:1.0: USB hub found
[ 47.812921] hub 6-0:1.0: 2 ports detected
[ 47.916594] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 47.916607] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 47.916613] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 47.916647] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 47.916679] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 47.916808] usb usb7: configuration #1 chosen from 1 choice
[ 47.916835] hub 7-0:1.0: USB hub found
[ 47.916840] hub 7-0:1.0: 2 ports detected
[ 48.069627] Driver 'sr' needs updating - please use bus_type methods
[ 48.095134] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 48.095140] Uniform CD-ROM driver Revision: 3.20
[ 48.095215] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 48.123339] sda1 sda2 <>
[ 48.151235] sd 2:0:0:0: [sda] Attached SCSI disk
[ 48.155735] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 48.155757] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 48.400205] Attempting manual resume
[ 48.400209] swsusp: Resume From Partition 8:5
[ 48.400210] PM: Checking swsusp image.
[ 48.400350] PM: Resume from disk failed.
[ 48.449836] kjournald starting. Commit interval 5 seconds
[ 48.449875] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.167030] Linux agpgart interface v0.102
[ 55.201283] agpgart: Detected an Intel 965GM Chipset.
[ 55.202421] agpgart: Detected 7676K stolen memory.
[ 55.231640] agpgart: AGP aperture is 256M @ 0xd0000000
[ 55.335770] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 55.366976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 55.497039] input: Power Button (FF) as /devices/virtual/input/input2
[ 55.534059] ACPI: Power Button (FF) [PWRF]
[ 55.534138] input: Lid Switch as /devices/virtual/input/input3
[ 55.534209] ACPI: Lid Switch [LID0]
[ 55.534260] input: Power Button (CM) as /devices/virtual/input/input4
[ 55.565721] ACPI: Power Button (CM) [PWRB]
[ 55.622849] ACPI: WMI-Acer: Mapper loaded
[ 56.001549] ACPI: AC Adapter [ACAD] (on-line)
[ 56.084799] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 56.101397] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 56.113274] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 56.141386] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 56.330839] ACPI: Battery Slot [BAT1] (battery present)
[ 56.614181] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
[ 56.614211] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 56.647818] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 56.717624] iTCO_vendor_support: vendor-support=0
[ 56.746595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 56.746723] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 56.746783] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 57.029999] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 57.030003] ricoh-mmc: Copyright(c) Philip Langdale
[ 57.030411] ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
[ 57.030425] ricoh-mmc: Controller is now disabled.
[ 57.053839] sdhci: Secure Digital Host Controller Interface driver
[ 57.053841] sdhci: Copyright(c) Pierre Ossman
[ 57.053878] sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
[ 57.053900] ACPI: PCI Interrupt 0000:0e:06.1[B] -> GSI 23 (level, low) -> IRQ 21
[ 57.053916] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 57.053963] mmc0: SDHCI at 0xf8300800 irq 21 DMA
[ 57.121805] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[ 57.121810] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 57.121967] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 57.122006] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 57.122037] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 57.546399] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 58.716495] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 58.717036] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 58.923141] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 59.101607] lp: driver loaded but no devices found
[ 59.222750] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
[ 59.688069] EXT3 FS on sda1, internal journal
[ 60.476114] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 60.894299] No dock devices found.
[ 61.842783] apm: BIOS not found.
[ 61.964205] ppdev: user-space parallel port driver
[ 62.048425] audit(1210421073.685:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5163 profile="/usr/sbin/cupsd" namespace="default"
[ 62.920653] Bluetooth: Core ver 2.11
[ 62.920777] NET: Registered protocol family 31
[ 62.920781] Bluetooth: HCI device and connection manager initialized
[ 62.920786] Bluetooth: HCI socket layer initialized
[ 62.987193] Bluetooth: L2CAP ver 2.9
[ 62.987201] Bluetooth: L2CAP socket layer initialized
[ 63.098721] Bluetooth: RFCOMM socket layer initialized
[ 63.098734] Bluetooth: RFCOMM TTY layer initialized
[ 63.098737] Bluetooth: RFCOMM ver 1.8
[ 63.520840] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 63.520847] tg3: eth0: Flow control is on for TX and on for RX.
[ 65.130751] [drm] Initialized drm 1.1.0 20060810
[ 65.142466] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 65.142480] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 65.142566] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 65.191618] NET: Registered protocol family 17
[ 66.217287] NET: Registered protocol family 10
[ 66.217691] lo: Disabled Privacy Extensions
[ 66.219177] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 69.871770] eth0: no IPv6 routers present
[ 74.621898] CPU0 attaching NULL sched-domain.
[ 74.621908] CPU1 attaching NULL sched-domain.
[ 74.633545] CPU0 attaching sched-domain:
[ 74.633554] domain 0: span 03
[ 74.633557] groups: 01 02
[ 74.633563] CPU1 attaching sched-domain:
[ 74.633566] domain 0: span 03
[ 74.633569] groups: 02 01- - -
